Disabled Lift Measurements
Disabled lift dimensions are very important for those who need a disabled lift and want to get it done. They need to find an elevator model that is suitable for the dimensions of the place they intend to have, and these dimensions should be able to meet their needs.
As you can see we are talking about two separate measures. Firstly, the dimensions of the place where the elevator will be built and its height and height must be determined clearly. Accurate and clear measurements should be taken as possible, considering that there may be curvature on the walls. Customers or end users usually cannot take these measures fully, because they may not be trained in this regard. Just holding the meter and reading it is not enough. Perhaps there is a ledge and curvature on the wall that may affect the movement of the elevator, and someone who is not trained in this regard may not realize this.
The second measure is the dimensions of the disabled elevator to be produced. These measurements are important for the following reason, according to the condition of the disabled who will use it, you can relax in the elevator.
Let’s say; The place to build the elevator is 100 x 100 cm and a lift platform in which a wheelchair can be entered is required. Let’s examine this example. Technically it is possible to build a disabled elevator that can fit in an area of 100×100 cm, nobody can object to this. But considering the dimensions of the wheelchair; If we accept the dimensions of an average wheelchair as 70 cm wide and 110 cm long, leave the elevator in an area of 100×100 cm as the law of physics, even the wheelchair itself cannot fit in this area.
Therefore, in these two dimensions, the disabled must have a value suitable for the purpose of use. So the optimum point should be determined.
Below you will find some disabled lift dimensions. We hope it will be useful for your search.